The Bissell ProHeat Pet TurboClean is a popular choice for pet owners looking to tackle tough messes. This powerful machine offers deep cleaning capabilities, specifically designed to remove pet hair and stains. This guide will walk you through everything you need to know about your Bissell ProHeat Pet TurboClean, from setup and operation to maintenance and troubleshooting. We'll even answer some frequently asked questions to help you get the most out of your investment.
Understanding Your Bissell ProHeat Pet TurboClean
Before diving into the specifics, let's understand what makes this machine unique. The ProHeat Pet TurboClean combines the power of a hot water extraction cleaner with specialized pet-focused features. This means it effectively lifts dirt and stains from your carpets, leaving them cleaner and fresher. The "Pet" designation indicates features specifically designed to address pet-related messes, such as powerful suction for pet hair and specialized cleaning solutions. The "TurboClean" feature typically refers to a brush roll designed for enhanced cleaning performance.
Getting Started: Setup and First Use
Setting up your Bissell ProHeat Pet TurboClean is generally straightforward. The manual provides detailed instructions, but here's a summary:
- Unpack: Carefully remove all components from the box.
- Assembly: Assemble the handle, wand, and hose as directed in your manual.
- Fill the Tanks: Fill the clean water tank with the recommended cleaning solution (Bissell's ProHeat cleaning formula is often recommended, though you can check the manual). Fill the recovery tank according to the instructions.
- Power Up: Plug in the machine and allow it to heat up.
- Test Run: Perform a test run on a small, inconspicuous area of your carpet to check for any issues before cleaning the entire room.
Important Note: Always consult your specific Bissell ProHeat Pet TurboClean manual for detailed setup instructions and safety precautions. Model numbers vary, and instructions may slightly differ.
How to Use the Bissell ProHeat Pet TurboClean Effectively
The Bissell ProHeat Pet TurboClean uses hot water extraction, often referred to as steam cleaning. This involves spraying hot water and cleaning solution onto the carpet and then immediately suctioning it back up along with the loosened dirt and grime.
- Pre-treatment: For stubborn stains, consider pre-treating them with a stain remover before using the machine. Let the pre-treatment sit for the recommended time.
- Cleaning: Slowly move the machine back and forth across the carpet, overlapping each pass to ensure thorough cleaning. Avoid lingering in one spot for too long.
- Multiple Passes: For heavily soiled carpets, you may need to make multiple passes over the same area.
- Drying: Allow the carpet to dry completely before walking on it. This can take several hours depending on factors such as humidity and airflow.
Bissell ProHeat Pet TurboClean Maintenance
Regular maintenance will extend the life of your cleaner. This includes:
- Emptying Tanks: Empty the dirty water tank after each use.
- Cleaning the Filters: Clean or replace the filters regularly, as specified in your manual.
- Cleaning the Brush Roll: Remove and clean the brush roll to remove pet hair and debris.
- Hose and Wand Cleaning: Rinse the hose and wand with clean water after each use.
Note: Refer to your manual for specific instructions on cleaning and replacing parts.
Troubleshooting Common Issues
My Bissell ProHeat Pet TurboClean is not spraying solution.
This could be due to several things: An empty solution tank, a clogged nozzle, or a problem with the solution pump. Check the solution tank, and inspect the nozzle for blockages. Consult your manual for troubleshooting the solution pump.
My Bissell ProHeat Pet TurboClean is leaving the carpet too wet.
This may indicate you're moving the machine too slowly or applying too much solution. Try moving more quickly and reducing the amount of solution used. You can adjust the solution settings if your machine allows.
My Bissell ProHeat Pet TurboClean is not picking up dirt and pet hair effectively.
This is often due to a clogged filter, a full recovery tank, or a dirty brush roll. Check these components and clean or replace them as needed.
Where can I find replacement parts for my Bissell ProHeat Pet TurboClean?
You can typically find replacement parts on Bissell's website or through authorized retailers. Your manual may list authorized service centers as well.
This guide provides a general overview. Always refer to your machine's specific instruction manual for detailed instructions and safety precautions. Happy cleaning!
